General info for IS-3
Extended parameters
- Mass 48.0 ton
- Price 390,000€
- Wp bonus 130%
- Exp bonus 200%
- Training cost 110,000€
- Visibility 85 %
- Reload time 26.0 s
- Free repairs 10
- Horse powers 671 hp at 2000 rpm
- Max speed 43 km/h
- Max inclination 39°
- Full repair cost 3,350€
-
Weapon
122 mm D-25T cannon (Ammo: 28) 12.7 mm DShK machine gun (Ammo: 300) 7.62 mm DT machine gun (Ammo: 2000)
- Turn turret speed 7.3°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 5d 15h
- Armor thickness hull (back) 60 mm
- Armor thickness hull (rear) 90 mm
- Armor thickness hull (front) 110 mm
- Armor thickness turret (back) 70 mm
- Armor thickness turret (rear) 172 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -3°
- Armor thickness turret (front) 250 mm
- Mass 48.0 ton
- Price 390,000€
- Wp bonus 150%
- Exp bonus 200%
- Training cost 110,000€
- Visibility 85 %
- Reload time 26.0 s
- Free repairs 10
- Horse powers 460 hp at 2000 rpm
- Max speed 40 km/h
- Max inclination 40°
- Full repair cost 6,100€
-
Weapon
122 mm D-25T cannon (Ammo: 28) 12.7 mm DShK machine gun (Ammo: 300) 7.62 mm DT machine gun (Ammo: 2000)
- Turn turret speed 5.4°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 10d
- Armor thickness hull (back) 60 mm
- Armor thickness hull (rear) 90 mm
- Armor thickness hull (front) 110 mm
- Armor thickness turret (back) 70 mm
- Armor thickness turret (rear) 172 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -3°
- Armor thickness turret (front) 250 mm
- Mass 48.0 ton
- Price 390,000€
- Wp bonus 180%
- Exp bonus 200%
- Training cost 110,000€
- Visibility 85 %
- Reload time 26.0 s
- Free repairs 10
- Horse powers 460 hp at 2000 rpm
- Max speed 40 km/h
- Max inclination 40°
- Full repair cost 5,760€
-
Weapon
122 mm D-25T cannon (Ammo: 28) 12.7 mm DShK machine gun (Ammo: 300) 7.62 mm DT machine gun (Ammo: 2000)
- Turn turret speed 5.4°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 10d
- Armor thickness hull (back) 60 mm
- Armor thickness hull (rear) 90 mm
- Armor thickness hull (front) 110 mm
- Armor thickness turret (back) 70 mm
- Armor thickness turret (rear) 172 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -3°
- Armor thickness turret (front) 250 mm
IS-3 / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 271
- Win rate 49.02%
- Air frags per battle 0.01
- Air frags per death 0.01
- Ground frags per battle 2.58
- Ground frags per death 2.35
- Battles 1402
- Win rate 46.59%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 1.67
- Ground frags per death 1.45
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about IS-3
In spite of the fact that the IS-2 lived up to expectations, a decision was made a year after the end of the war to create a tank with even higher characteristics. Its unique welded hull and cast turret construction significantly increased its armour strength in comparison to the IS-2, from which it took many key parts and components. The hull was welded together from rolled armour plates and contained no cast armour pieces. The dual-sloping inclined nose design allowed a driver's hatch to be placed in it, significantly improved visibility in the field, and provided high armour strength to the frontal hull. For increased fire safety, its fuel tanks were moved from the fighting compartment to the engine compartment. It was armed with a 122 mm D-25T cannon with a coaxial 7.62 mm DT machine gun. The turret's roof was equipped with a 12.7 mm DShK anti-aircraft machine gun. It had no bow or rear machine guns. At the beginning of their deployment, a range of flaws resulting from a number of design errors and miscalculations was revealed in these tanks. Among other issues, these included failures in the engine, gearbox, and parts of the armoured hull in the region of the engine compartment. In 1948-1952, all IS-3 tanks were reworked and modernised. The engine brackets were reinforced, the gearbox fixings changed, the underturret plate strengthened, the main friction coupling design updated, and the sealing enhanced on the final drive and road wheels. The 10-RK radio set was replaced with the 10-RT radio set. These changes increased the tank's mass to 48.8 tonnes. The first experimental group of IS-3 heavy tanks left their factories in 1945. In total, 2,311 of them were made by mid-1946. They were not deployed in combat in the Great Patriotic War. There are some indications that the IS-3 was used in the defeat of the Japanese army in August 1945.