General info for Pz.III N
- Country Germany
- Vehicle role Medium Tank
- Rank 2
-
Battle rating in
- arcade battles 3
- realistic battles 3
- simulator battles 3
Extended parameters
- Mass 23.0 ton
- Price 1,000¤
- Wp bonus 120%
- Exp bonus 248%
- Training cost 8,100€
- Visibility 88 %
- Reload time 4.3 s
- Free repairs 30
- Horse powers 465 hp at 3000 rpm
- Max speed 59 km/h
- Max inclination 27°
- Full repair cost 1,380€
-
Weapon
75 mm KwK37 cannon (Ammo: 64) 7.92 mm MG34 machine gun (Ammo: 3450)
- Turn turret speed 13.3°/s
- armor_piercing_100 56 mm
- armor_piercing_500 54 mm
- armor_piercing_1000 50 mm
- Weapon presets tank 1
- Full repair time crew 2h 04m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 57 mm
- Mass 23.0 ton
- Price 1,000¤
- Wp bonus 200%
- Exp bonus 248%
- Training cost 8,100€
- Visibility 88 %
- Reload time 4.3 s
- Free repairs 30
- Horse powers 265 hp at 3000 rpm
- Max speed 53 km/h
- Max inclination 30°
- Full repair cost 1,840€
-
Weapon
75 mm KwK37 cannon (Ammo: 64) 7.92 mm MG34 machine gun (Ammo: 3450)
- Turn turret speed 8.3°/s
- armor_piercing_100 56 mm
- armor_piercing_500 54 mm
- armor_piercing_1000 50 mm
- Weapon presets tank 1
- Full repair time crew 4h 09m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 57 mm
- Mass 23.0 ton
- Price 1,000¤
- Wp bonus 220%
- Exp bonus 248%
- Training cost 8,100€
- Visibility 88 %
- Reload time 4.3 s
- Free repairs 30
- Horse powers 265 hp at 3000 rpm
- Max speed 53 km/h
- Max inclination 30°
- Full repair cost 1,970€
-
Weapon
75 mm KwK37 cannon (Ammo: 64) 7.92 mm MG34 machine gun (Ammo: 3450)
- Turn turret speed 8.3°/s
- armor_piercing_100 56 mm
- armor_piercing_500 54 mm
- armor_piercing_1000 50 mm
- Weapon presets tank 1
- Full repair time crew 4h 09m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 57 mm
Pz.III N / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 32
- Win rate 100%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 3.1
- Ground frags per death 3.1
- Battles 102
- Win rate 74.64%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 4.04
- Ground frags per death 4.33
- Battles 23
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death 1
Wiki info about Pz.III N
The Pz.Kpfw. III Ausf. N variant was an assault tank. Ausf. L and Ausf. M chassis were used to produce this variant. This variant was produced to meet the need for a stronger tank, one that could more effectively handle the Soviet T-34 and KV-1. A 75 mm long-barreled gun could not be installed in the turret due to the turret box's limited size. The designers decided to use the short-barreled 7.5cm KwK37 L/24 gun along with hollow-charge shells. This explosive projectile packed more punch than the 5 cm KwK39 L/60 gun. To accommodate this change, the gun's mantlet was redesigned. The gun's recoil mechanisms were improved, the single-hinged hatch for the command turret was replaced with a two-hinged hatch, and the thickness of the commander's cupola walls was increased to 100 mm. This variant's operational weight was 23,000 kilograms. Most of the tanks received a 5 mm Schutzen side skirts to protect the tank's hull and turret. Production of Pz.Kpfw. III Ausf. N tanks began in June 1942 and lasted until August 1943. A total of 700 of these tanks were built. 3 were built from Pz.Kpfw. III Ausf. J tanks, 447 from Pz.Kpfw. III Ausf. L tanks, 213 from Pz.Kpfw. III Ausf. M tanks, and 37 from other variants after they had returned from the front. This tank variant earned a good reputation with the troops and, by the beginning of the battle at the Kursk Bulge, the Wehrmacht and Waffen-SS owned 155 vehicles of this type. Some of the tanks was transferred to Romania, Slovakia, and Croatia. Tanks of this variant were used until the end of the war and were transferred to Allied forces after Germany's surrender.