General info for Pz.III J1
Extended parameters
- Mass 21.8 ton
- Price 22,000€
- Wp bonus 80%
- Exp bonus 118%
- Training cost 6,300€
- Visibility 88 %
- Reload time 4.8 s
- Free repairs 10
- Horse powers 465 hp at 3000 rpm
- Max speed 59 km/h
- Max inclination 29°
- Full repair cost 640€
-
Weapon
50 mm KwK39 cannon (Ammo: 84) 7.92 mm MG34 machine gun (Ammo: 3750)
- Turn turret speed 13.3°/s
- armor_piercing_100 97 mm
- armor_piercing_500 96 mm
- armor_piercing_1000 79 mm
- Weapon presets tank 1
- Full repair time crew 1h 03m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 50 mm
- Mass 21.8 ton
- Price 22,000€
- Wp bonus 90%
- Exp bonus 118%
- Training cost 6,300€
- Visibility 88 %
- Reload time 4.8 s
- Free repairs 10
- Horse powers 265 hp at 3000 rpm
- Max speed 53 km/h
- Max inclination 32°
- Full repair cost 670€
-
Weapon
50 mm KwK39 cannon (Ammo: 84) 7.92 mm MG34 machine gun (Ammo: 3750)
- Turn turret speed 8.3°/s
- armor_piercing_100 97 mm
- armor_piercing_500 96 mm
- armor_piercing_1000 79 mm
- Weapon presets tank 1
- Full repair time crew 2h 07m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 50 mm
- Mass 21.8 ton
- Price 22,000€
- Wp bonus 100%
- Exp bonus 118%
- Training cost 6,300€
- Visibility 88 %
- Reload time 4.8 s
- Free repairs 10
- Horse powers 265 hp at 3000 rpm
- Max speed 53 km/h
- Max inclination 32°
- Full repair cost 650€
-
Weapon
50 mm KwK39 cannon (Ammo: 84) 7.92 mm MG34 machine gun (Ammo: 3750)
- Turn turret speed 8.3°/s
- armor_piercing_100 97 mm
- armor_piercing_500 96 mm
- armor_piercing_1000 79 mm
- Weapon presets tank 1
- Full repair time crew 1h 54m
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 30 mm
- Armor thickness hull (front) 50 mm
- Armor thickness turret (back) 30 mm
- Armor thickness turret (rear) 30 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 50 mm
Pz.III J1 / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 13
- Win rate 100%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 4.13
- Ground frags per death 2.58
- Battles 113
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 3.26
- Ground frags per death 1.97
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about Pz.III J1
Then next modification to the Pz.Kpfw.III medium tank after Ausf. J, featuring an enhanced armament. These tanks, which were armed with KwK38 L/42 cannons, were unable to fight successfully against Soviet T-34 and KB tanks, whose armor could withstand the impact of projectiles fired by the short-barreled cannon. The tank’s armament had to be enhanced. The new weapon selected was the long-barreled KwK39 L/60, which featured high ballistic characteristics. However, despite these enhanced characteristics, fighting Soviet tanks remained extremely difficult. Tanks with the new armament began to be released in December, 1941. A total of 1,067 tanks with the Pz.Kpfw.III Ausf.J modification and KwK39 L/60 cannon were produced.