General info for ZSU-37
Extended parameters
- Mass 12.2 ton
- Price 170,000€
- Wp bonus 120%
- Exp bonus 160%
- shot_freq 160 Shots per minute
- Training cost 49,000€
- Visibility 70 %
- Reload time 1.3 s
- Free repairs 10
- Horse powers 199 hp at 3400 rpm
- Max speed 46 km/h
- Max inclination 28°
- Full repair cost 3,600€
-
Weapon
37 mm 61-K cannon (Ammo: 290)
- Turn turret speed 26.4°/s
- armor_piercing_100 60 mm
- armor_piercing_500 57 mm
- armor_piercing_1000 42 mm
- Weapon presets tank 1
- Full repair time crew 1d 21h
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 15 mm
- Armor thickness hull (front) 45 mm
- Armor thickness turret (back) 8 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 85°
- Angle vertical guidance (min) -5°
- Armor thickness turret (front) 15 mm
- Mass 12.2 ton
- Price 170,000€
- Wp bonus 110%
- Exp bonus 160%
- shot_freq 160 Shots per minute
- Training cost 49,000€
- Visibility 70 %
- Reload time 1.3 s
- Free repairs 10
- Horse powers 124 hp at 3400 rpm
- Max speed 42 km/h
- Max inclination 30°
- Full repair cost 1,090€
-
Weapon
37 mm 61-K cannon (Ammo: 290)
- Turn turret speed 17.9°/s
- armor_piercing_100 60 mm
- armor_piercing_500 57 mm
- armor_piercing_1000 42 mm
- Weapon presets tank 1
- Full repair time crew 2d 08h
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 15 mm
- Armor thickness hull (front) 45 mm
- Armor thickness turret (back) 8 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 85°
- Angle vertical guidance (min) -5°
- Armor thickness turret (front) 15 mm
- Mass 12.2 ton
- Price 170,000€
- Wp bonus 160%
- Exp bonus 160%
- shot_freq 160 Shots per minute
- Training cost 49,000€
- Visibility 70 %
- Reload time 1.3 s
- Free repairs 10
- Horse powers 124 hp at 3400 rpm
- Max speed 42 km/h
- Max inclination 30°
- Full repair cost 1,860€
-
Weapon
37 mm 61-K cannon (Ammo: 290)
- Turn turret speed 17.9°/s
- armor_piercing_100 60 mm
- armor_piercing_500 57 mm
- armor_piercing_1000 42 mm
- Weapon presets tank 1
- Full repair time crew 2d 15h
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 15 mm
- Armor thickness hull (front) 45 mm
- Armor thickness turret (back) 8 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 85°
- Angle vertical guidance (min) -5°
- Armor thickness turret (front) 15 mm
ZSU-37 / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 85
- Win rate 16.67%
- Air frags per battle 2.39
- Air frags per death 1.86
- Ground frags per battle N/A
- Ground frags per death N/A
- Battles 252
- Win rate 44.47%
- Air frags per battle 0.37
- Air frags per death 0.16
- Ground frags per battle 0.75
- Ground frags per death 0.32
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about ZSU-37
Since tank divisions were facing greater losses from attacks by enemy assault aircraft, the decision was made to create a self-propelled anti-air mount based on light tanks. Work on the creation of a self-propelled installation based on the T-70 tank began in 1942. Two experimental models were released. Serious design flaws were uncovered during the testing phase. In December, 1943 the ZSU-37 SPG was built at Factory #38 under the management of M.N. Shukin. It was armed with a 37mm KB M.N. Loginov 61-K AA cannon. The vehicle was based on the SU-76M SPG, but instead of a combat cockpit they installed an open, rotating turret. An experimental model of the vehicle successfully underwent state-run testing and was recommended for serial production. However, due to production difficulties, serial production was moved to Factory #40 in Mytishchi. The vehicle’s design was enhanced at the new factory, and, after undergoing testing in October-November 1944, the vehicle began to be released serially. The vehicle was released in a small series of 75 units from 1945-1946. It was never used in combat.