General info for SU-122P
Extended parameters
- Mass 32.0 ton
- Price 6,090¤
- Wp bonus 180%
- Exp bonus 356%
- Training cost 10,000€
- Visibility 76 %
- Reload time 21.7 s
- Free repairs 30
- Horse powers 710 hp at 2050 rpm
- Max speed 62 km/h
- Max inclination 27°
- Full repair cost 1,550€
-
Weapon
122 mm D-25S cannon (Ammo: 28)
- Turn turret speed 6.2°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 1d 18h
- Armor thickness hull (back) 45 mm
- Armor thickness hull (rear) 45 mm
- Armor thickness hull (front) 75 mm
- Armor thickness turret (back) 45 mm
- Armor thickness turret (rear) 45 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -2°
- Armor thickness turret (front) 75 mm
- Mass 32.0 ton
- Price 6,090¤
- Wp bonus 280%
- Exp bonus 356%
- Training cost 10,000€
- Visibility 76 %
- Reload time 21.7 s
- Free repairs 30
- Horse powers 442 hp at 2050 rpm
- Max speed 57 km/h
- Max inclination 29°
- Full repair cost 2,650€
-
Weapon
122 mm D-25S cannon (Ammo: 28)
- Turn turret speed 4.2°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 3d 19h
- Armor thickness hull (back) 45 mm
- Armor thickness hull (rear) 45 mm
- Armor thickness hull (front) 75 mm
- Armor thickness turret (back) 45 mm
- Armor thickness turret (rear) 45 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -2°
- Armor thickness turret (front) 75 mm
- Mass 32.0 ton
- Price 6,090¤
- Wp bonus 340%
- Exp bonus 356%
- Training cost 10,000€
- Visibility 76 %
- Reload time 21.7 s
- Free repairs 30
- Horse powers 442 hp at 2050 rpm
- Max speed 57 km/h
- Max inclination 29°
- Full repair cost 3,200€
-
Weapon
122 mm D-25S cannon (Ammo: 28)
- Turn turret speed 4.2°/s
- armor_piercing_100 200 mm
- armor_piercing_500 196 mm
- armor_piercing_1000 179 mm
- Weapon presets tank 1
- Full repair time crew 3d 21h
- Armor thickness hull (back) 45 mm
- Armor thickness hull (rear) 45 mm
- Armor thickness hull (front) 75 mm
- Armor thickness turret (back) 45 mm
- Armor thickness turret (rear) 45 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -2°
- Armor thickness turret (front) 75 mm
SU-122P / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 34
- Win rate 100%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 1.69
- Ground frags per death 3
- Battles 116
- Win rate 45.68%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 3.05
- Ground frags per death 2.81
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about SU-122P
A new SPG, designated SU-122P, was designed in the spring of 1944. Its designers attempted to fit the previously developed SU-100 SPG with a powerful 122 mm D-25S cannon with the aim of increasing the SPG's firepower. Outwardly, this SPG differed from the SU-100 in that its barrel was longer and had a muzzle brake. In September 1944, the SU-122P SPG underwent factory testing, which it passed successfully. In spite of this, the order to put it into mass production did not follow. There were several reasons for this decision. First of all, the 122 mm D-25S cannon's penetration was lower than that of the D-10S by 4-5 mm, and its ammunition capacity was reduced to 26. Due to its separate loading, its rate of fire was reduced to 3-4 shots per minute, and the weapon's recoil was higher than that of the SU-100's, which negatively affected the undercarriage's durability. The previous issues of inadequate space in the fighting compartment had remained unsolved. In addition, SPGs with a similar cannon had already been designed based on the IS-2, which had a more suitable chassis, hull and cabin for heavy artillery weapons. Only 1 experimental SU-122P SPG was produced.