General info for T32
Extended parameters
- Mass 54.0 ton
- Price 300,000€
- Wp bonus 150%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 107 %
- Reload time 18.8 s
- Free repairs 10
- Horse powers 994 hp at 2800 rpm
- Max speed 37 km/h
- Max inclination 40°
- Full repair cost 6,560€
-
Weapon
90 mm T15E2 cannon (Ammo: 54) 12.7 mm M2HB machine gun (Ammo: 1000) 7.62 mm M1919A4 machine gun (Ammo: 4000)
- Turn turret speed 19.4°/s
- armor_piercing_100 217 mm
- armor_piercing_500 216 mm
- armor_piercing_1000 202 mm
- Weapon presets tank 1
- Full repair time crew 6d 09h
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 76 mm
- Armor thickness hull (front) 127 mm
- Armor thickness turret (back) 152 mm
- Armor thickness turret (rear) 152 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 298 mm
- Mass 54.0 ton
- Price 300,000€
- Wp bonus 150%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 107 %
- Reload time 18.8 s
- Free repairs 10
- Horse powers 681 hp at 2800 rpm
- Max speed 35 km/h
- Max inclination 40°
- Full repair cost 6,560€
-
Weapon
90 mm T15E2 cannon (Ammo: 54) 12.7 mm M2HB machine gun (Ammo: 1000) 7.62 mm M1919A4 machine gun (Ammo: 4000)
- Turn turret speed 14.3°/s
- armor_piercing_100 217 mm
- armor_piercing_500 216 mm
- armor_piercing_1000 202 mm
- Weapon presets tank 1
- Full repair time crew 11d
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 76 mm
- Armor thickness hull (front) 127 mm
- Armor thickness turret (back) 152 mm
- Armor thickness turret (rear) 152 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 298 mm
- Mass 54.0 ton
- Price 300,000€
- Wp bonus 180%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 107 %
- Reload time 18.8 s
- Free repairs 10
- Horse powers 681 hp at 2800 rpm
- Max speed 35 km/h
- Max inclination 40°
- Full repair cost 7,250€
-
Weapon
90 mm T15E2 cannon (Ammo: 54) 12.7 mm M2HB machine gun (Ammo: 1000) 7.62 mm M1919A4 machine gun (Ammo: 4000)
- Turn turret speed 14.3°/s
- armor_piercing_100 217 mm
- armor_piercing_500 216 mm
- armor_piercing_1000 202 mm
- Weapon presets tank 1
- Full repair time crew 11d
- Armor thickness hull (back) 50 mm
- Armor thickness hull (rear) 76 mm
- Armor thickness hull (front) 127 mm
- Armor thickness turret (back) 152 mm
- Armor thickness turret (rear) 152 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -10°
- Armor thickness turret (front) 298 mm
T32 / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 237
- Win rate 64.08%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 3.37
- Ground frags per death 4.24
- Battles 484
- Win rate 65.93%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 4.47
- Ground frags per death 3.09
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about T32
In 1944-1945 the Ordnance Department initiated the T29 program, which was the high priority construction of several tanks based on the M26. The end result was the next version of the M26 Pershing. The US ground forces needed a new, modified version of the mass-produced M26 outfitted with thicker armor, heavier weaponry, and an enlarged turret. On February 8, 1945, the construction of four prototypes was approved, with the official T32 designation conferred in March. The tank hull was made from plates of homogeneous armor, and protecting the front section was prioritized. As a result, the armor there was 70-127 mm thick, while the side armor was made with 51-76 mm armor plates and the rear was protected by only 19-51 mm. The thickness of the lower section's front part was expanded to 38 mm, identical to the hull roof. The hull enjoyed a traditional design, though two prototypes had a cast front hull section and the other two had welded components. The turret construction resembled the T29 models, which were larger than the M26 and had a gun mantlet that was expanded to 298 mm. The main weapon was a 90 mm T15E2 cannon with separate tube reloading. The weapon boasted high initial velocity and was good at penetrating armor, outstripping almost every one of its foreign equivalents. Regardless of the work put into the project, the tank could not be completed by the end of the war, after which the T32 program lost its priority status. The conclusion had already been drawn by 1946 that there was no need to mass produce the model, given that M29s with similar weaponry already existed. There were also more powerful tanks in the pipeline.