General info for Pz.II F
Extended parameters
- Mass 9.1 ton
- Price 700€
- Wp bonus 10%
- shot_freq 450 Shots per minute
- Training cost 200€
- Visibility 73 %
- Reload time 7.8 s
- Free repairs 10
- Horse powers 217 hp at 2600 rpm
- Max speed 49 km/h
- Max inclination 40°
- Full repair cost 120€
-
Weapon
20 mm KwK38 cannon (Ammo: 180) 7.92 mm MG34 machine gun (Ammo: 1800)
- Turn turret speed 13.3°/s
- armor_piercing_100 46 mm
- armor_piercing_500 45 mm
- armor_piercing_1000 33 mm
- Weapon presets tank 1
- Full repair time crew 10m
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 20 mm
- Armor thickness hull (front) 35 mm
- Armor thickness turret (back) 15 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -9°
- Armor thickness turret (front) 30 mm
- Mass 9.1 ton
- Price 700€
- Wp bonus 20%
- shot_freq 450 Shots per minute
- Training cost 200€
- Visibility 73 %
- Reload time 7.8 s
- Free repairs 10
- Horse powers 124 hp at 2600 rpm
- Max speed 44 km/h
- Max inclination 40°
- Full repair cost 140€
-
Weapon
20 mm KwK38 cannon (Ammo: 180) 7.92 mm MG34 machine gun (Ammo: 1800)
- Turn turret speed 8.3°/s
- armor_piercing_100 46 mm
- armor_piercing_500 45 mm
- armor_piercing_1000 33 mm
- Weapon presets tank 1
- Full repair time crew 21m
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 20 mm
- Armor thickness hull (front) 35 mm
- Armor thickness turret (back) 15 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -9°
- Armor thickness turret (front) 30 mm
- Mass 9.1 ton
- Price 700€
- Wp bonus 20%
- shot_freq 450 Shots per minute
- Training cost 200€
- Visibility 73 %
- Reload time 7.8 s
- Free repairs 10
- Horse powers 124 hp at 2600 rpm
- Max speed 44 km/h
- Max inclination 40°
- Full repair cost 150€
-
Weapon
20 mm KwK38 cannon (Ammo: 180) 7.92 mm MG34 machine gun (Ammo: 1800)
- Turn turret speed 8.3°/s
- armor_piercing_100 46 mm
- armor_piercing_500 45 mm
- armor_piercing_1000 33 mm
- Weapon presets tank 1
- Full repair time crew 21m
- Armor thickness hull (back) 15 mm
- Armor thickness hull (rear) 20 mm
- Armor thickness hull (front) 35 mm
- Armor thickness turret (back) 15 mm
- Armor thickness turret (rear) 15 mm
- Angle vertical guidance (max) 20°
- Angle vertical guidance (min) -9°
- Armor thickness turret (front) 30 mm
Pz.II F / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
- Battles 6
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
- Battles N/A
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about Pz.II F
The Pz.Kpfw. II Ausf. F was the last production variant of the Pz.Kpfw. II tank. Serial production of the vehicle was meant to answer a need for new tank formations, as medium tanks were produced in very insufficient quantities. The design of the tank was similar to the Pz.Kpfw. II Ausf. C, except for the bent forward portion of the hull, which was made of 33 mm thick solid armor plating. The thickness of the frontal portion of the superstructure, turrets, and gun mantlet was increased to 30 mm. The armor thickness on the sides and stern was 15 mm. On the right side of the frontal portion of the tank's superstructure, a fake driver's viewport was installed. In addition, the driver received a KFF-2 surveillance device, which allowed a viewing angle of 63° and was protected by a two-hinged lid. A container for the crew's things was affixed to the rear of the turret. The main section of the Pz.Kpfw. II Ausf. F was equipped with a new 20 mm 2 cm KwK38 automatic cannon with a TZF 3a sight. In addition to improvements in its weapons' ballistic performance, in 1940 the tank received the pointed armor-piercing Pzgr 40 L'Spur shell, with an armor-piercing core made of solid tungsten carbide alloy. These measures greatly increased its armor penetration capabilities. The ammunition on the latest series of tanks was increased to 180 shells and 2,100 rounds. The turret was equipped with an improved rotation mechanism and a new design for the gun mantlets' armored viewports. From 1941 to 1942, the four companies MAN, Deimler-Benz, FAMO, and MIAG produced a total of 533 tanks. The tank was used extensively until the end of 1942. Self-propelled anti-aircraft guns, tank destroyers, and flame tanks were designed using this variant as a base.