General info for Panther II
Extended parameters
- Mass 53.0 ton
- Price 300,000€
- Wp bonus 120%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 116 %
- Reload time 11.1 s
- Free repairs 10
- Horse powers 1395 hp at 3000 rpm
- Max speed 60 km/h
- Max inclination 40°
- Full repair cost 2,400€
-
Weapon
88 mm KwK43 cannon (Ammo: 50) 7.92 mm MG34 machine gun (Ammo: 3000)
- Turn turret speed 11.4°/s
- armor_piercing_100 235 mm
- armor_piercing_500 232 mm
- armor_piercing_1000 219 mm
- Weapon presets tank 1
- Full repair time crew 3d 15h
- Armor thickness hull (back) 40 mm
- Armor thickness hull (rear) 60 mm
- Armor thickness hull (front) 100 mm
- Armor thickness turret (back) 60 mm
- Armor thickness turret (rear) 60 mm
- Angle vertical guidance (max) 15°
- Angle vertical guidance (min) -8°
- Armor thickness turret (front) 120 mm
- Mass 53.0 ton
- Price 300,000€
- Wp bonus 150%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 116 %
- Reload time 11.1 s
- Free repairs 10
- Horse powers 796 hp at 3000 rpm
- Max speed 54 km/h
- Max inclination 40°
- Full repair cost 3,800€
-
Weapon
88 mm KwK43 cannon (Ammo: 50) 7.92 mm MG34 machine gun (Ammo: 3000)
- Turn turret speed 7.1°/s
- armor_piercing_100 235 mm
- armor_piercing_500 232 mm
- armor_piercing_1000 219 mm
- Weapon presets tank 1
- Full repair time crew 7d
- Armor thickness hull (back) 40 mm
- Armor thickness hull (rear) 60 mm
- Armor thickness hull (front) 100 mm
- Armor thickness turret (back) 60 mm
- Armor thickness turret (rear) 60 mm
- Angle vertical guidance (max) 15°
- Angle vertical guidance (min) -8°
- Armor thickness turret (front) 120 mm
- Mass 53.0 ton
- Price 300,000€
- Wp bonus 170%
- Exp bonus 196%
- Training cost 85,000€
- Visibility 116 %
- Reload time 11.1 s
- Free repairs 10
- Horse powers 796 hp at 3000 rpm
- Max speed 54 km/h
- Max inclination 40°
- Full repair cost 4,000€
-
Weapon
88 mm KwK43 cannon (Ammo: 50) 7.92 mm MG34 machine gun (Ammo: 3000)
- Turn turret speed 7.1°/s
- armor_piercing_100 235 mm
- armor_piercing_500 232 mm
- armor_piercing_1000 219 mm
- Weapon presets tank 1
- Full repair time crew 7d
- Armor thickness hull (back) 40 mm
- Armor thickness hull (rear) 60 mm
- Armor thickness hull (front) 100 mm
- Armor thickness turret (back) 60 mm
- Armor thickness turret (rear) 60 mm
- Angle vertical guidance (max) 15°
- Angle vertical guidance (min) -8°
- Armor thickness turret (front) 120 mm
Panther II / statistics for the last 1 month
These may be very different from the real, because we are monitoring only those players who use our site.
- Battles 314
- Win rate 70.23%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 3.14
- Ground frags per death 3.5
- Battles 333
- Win rate 61.25%
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle 4.83
- Ground frags per death 4.43
- Battles 2
- Win rate N/A
- Air frags per battle N/A
- Air frags per death N/A
- Ground frags per battle N/A
- Ground frags per death N/A
Wiki info about Panther II
Having adopted the Tiger II tank in the autumn of 1943, the Ministry of Armaments ordered the development of a new Panther II tank, specifying that maximum compatibility between the assembly of the two tanks be maintained. Development of the new tank design was assigned to the company Henschel & Sohn. The new tank was to have thicker armor (100 mm in the front and 60 mm on the sides) and was to be equipped with a Schmalturm turret. The main armament consisted of an 88 mm 8,8 cm KwK 43 L/70 tank gun with a long 70-caliber barrel, the same gun which was installed on the Tiger II(P). The tank's weight had to be increased to 55 tons or more. The main design problem was the lack of a suitable engine for the heavier vehicle. Several options were developed for installing a MAN/Argus LD 220 750 hp engine or a Maybach HL 234 900 hp engine, using an eight-speed hydromechanical AK 7-200 gearbox, but this work was never completed. The chassis of the new Panther consisted of 7 all-metal rollers on a single torsion bar. The tank's treads were 660 mm wide. By late 1944, the company had only managed to build one tank hull, which for testing purposes was fitted with a turret from a production Panther Ausf. G. The testing was never completed, and the tank was captured by American troops. This tank's hull is kept in the Patton Museum of Cavalry and Armor in Fort Knox. It is likely that two Panther II prototypes were built which may have participated in battles at the end of the war. Further work, however, virtually stopped. Project E50 was commissioned to replace both the Panther I and the Panther II.